NETGEAR WNAP210 User Manual page 64

Table 5. Access point default configuration settings (continued)
Feature
Spanning Tree Protocol
Secure Telnet
Wireless operating mode
Access point name
Wireless communication
11 b/g/n wireless network name (SSID)
Broadcast network name (SSID)
Security
Transmission speed
Country/Region
802.11gn Radio Frequency Channel
Output power
Wireless card access list
WMM support
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate.
ProSafe Wireless-N Access Point WNAP210
Default setting
Disabled
Enabled
Access Point
netgearxxxxxx, where xxxxxx represents the last 6 digits
of the wireless access point MAC address.
Enabled
NETGEAR_11ng
Enabled
Disabled
a
Best
Varies by region
Auto
Full
All wireless stations allowed
Enabled
Supplemental Information
64