Monitor The Wireless Access Point; View System Information - NETGEAR ProSafe Premium WNDAP660 Reference Manual

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Figure 45.
Specify the settings as explained in the following table:
Table 18. Syslog settings
Setting
Enable Syslog
Syslog Server IP Address
Port Number
2. Click Apply to save your settings.

Monitor the Wireless Access Point

•

View System Information

• Monitor Wireless Stations
• View the Activity Log
• Traffic Statistics
View System Information
The System screen provides a summary of the current wireless access point configuration
settings, including current IP settings and current wireless settings. This information is read
only, so any changes need to be made on other screens.
Description
Select the check box to enable the syslog option. By default, the syslog option
is disabled.
Enter the IP address of the syslog server to which the wireless access point
sends the syslog files.
Enter the port number that is configured on the syslog server. The default port
number is 514.
Management and Monitoring
77