Appendix B Command Line Reference; Command Sets - NETGEAR WNAP210 User Manual

Command Line Reference
B.
The ProSafe Wireless-N Access Point WNAP210 (AP) can be configured through either the
command-line interface (CLI), a web browser, or a MIB browser. The CLI allows viewing and
modification of the configuration from a terminal or computer through a Telnet connection.

Command Sets

keyword
-------------------------------------- ----------------------
|-backup-configuration
|-config>
| |-apname
| |-country
| |
| |-http-redirect
| |-http-redirect-url
| |-interface>
| | |-wlan>
| | | |-2.4GHz>
| | | | |-aggregation-length
| | | | |-ampdu
| | | | |-beacon-interval
| | | | |-channel
and wireless mode)
| | | | |-channelwidth
| | | | |-dtim-interval
| | | | |-extension-protection-spacing --wireless extension protection spacing
| | | | |-fragmentation-length
only)
| | | | |-guardinterval
transmissions)
| | | | |-knownap-add
| | | | |-knownap-del
Description
--backup configuration
--configuration setting
--access point name
--country/region
--enable HTTP redirection
--HTTP redirection URL
--select wireless lan interface
--wireless LAN interface setting
--2.4 GHz wireless LAN interface setting
--aggregated packet size
--aggregated MAC Protocol Data Unit
--wireless beacon period in TU(1024 us)
--wireless channel (depends on country
--wireless channel width
--wireless DTIM period in beacon interval
--wireless fragmentation threshold(even
--interval (from interference from other
--add known access point
--delete known access point
66
B