Restrict Wireless Access By Mac Address - NETGEAR WNAP210 User Manual

You manually or automatically program the four data encryption keys. These values have to
5.
be identical on all wireless clients and access points in your network. Select either:
Automatic. Enter a word or group of printable characters in the Passphrase box and
-
click the Generate Keys button. The four fields are automatically populated with key
values.
Manual. Enter the number of hexadecimal digits appropriate for the encryption
-
strength: 10 characters for 64-bit, 26 digits for 128-bit, or 32 characters for 152-bit
WEP encryption (any combination of 0–9, a–f, or A–F).
Select which of the four keys will be the default.
Select the key to be used as the default key by selecting the radio button. (Data
6.
transmissions are always encrypted using the default key.)
Leave the Wireless Client Security Separation radio button set to No (it is selected by
7.
default). If this feature is enabled, associated wireless clients will not be able to
communicate with each other. This feature is intended for hotspots and other public access
situations.
Click Apply to save your settings.
8.

Restrict Wireless Access by MAC Address

The access control list lets you block the network access privilege of any specified stations
through the acess point. When you enable access control, the access point accepts
connections only from clients on the selected access control list. This provides an additional
layer of security.
If configuring the access point from a wireless computer whose
Note:
MAC address is not in the access control list, if you select Turn
Access Control On, you will lose your wireless connection when you
click Apply. To make further changes, you have to connect to the
access point from computer that is on the access control list.

To restrict access based on MAC addresses:
Log in to the WNAP210 using the default address of http://192.168.0.236, user name of
1.
admin, and default password of password, or whatever LAN address and password
you have set up.
ProSafe Wireless-N Access Point WNAP210
Installation and Configuration
29