NETGEAR WNAP210 User Manual page 73

| | |-authentication-server-primary
| | |-authentication-server-primary-port
shared secret
| | |-authentication-server-primary-sharedsecret
shared secret
| | |-authentication-server-secondary
| | |-authentication-server-secondary-port
port
| | |-authentication-server-secondary-sharedsecret --secondary authentication
server shared secret
| |
| |-remote>
| | |-ssh-port
| | |-sshd
| | |-telnet
| |
| |-snmp>
| | |-description
| | |-read-community
| | |-snmp-status
| | |-trap-community
| | |-trap-server
| | |-write-community
| |
| |-spanning-tree
| |-time>
| | |-custom-ntp-server
| | |-daylightsaving
| | |-ntp-client
| | |-ntp-server
| | |-time-zone
| |
| |-vlan>
| | |-management-vlan
| | |-untagged-vlan
| | |-untagged-vlan-status
| |
|
|-exit
|-file
|-firmware-upgrade
|-password
|-restore-configuration
ProSafe Wireless-N Access Point WNAP210
--enable remote access via SSH
--SSH port
--SSH daemon
--enable remote access via Telnet
--SNMP setting
--SNMP system description
--SNMP ReadCommunity
--SNMP status
--SNMP ReadCommunity
--SNMP TrapServer IP address
--SNMP WriteCommunity
--enable spanning tree protocol
--time Setting
--custom NTP server host name
--daylight saving
--NTP client host name
--NTP server host name
--time zone
--vlan settings
--vlan management id
--untagged vlan id
--untagged vlan status
--logout from CLI
--
--upload new system firmware file
--system password
--restore system configuration
Command Line Reference
73
--primary authentication server
--primary system accounting server
--primary authentication server
--secondary authentication server
--secondary authentication server