Oneida Air Systems Dust Deputy AXD001004 Owner's Manual page 5

XII. Troubleshooting
Dust Deputy® not separating well. (Only a tiny amount of dust should reach the
vacuum.)
Air leak. Check cyclone flange / drum lid / barrel. Even small leaks
will affect performance.
Low air volume.
Vacuum filter clogged. Blockage in hose.
Material swirls in cyclone and won't drop down into drum.
Air leak in bottom of cyclone / drum lid or dust drum.
Large, bulkier material might swirl. Restart or temporarily cut off air flow to
drop material down.
Hose connections not tight.
Due to the varied hose diameters, flexible couplers
can be used. They are available at local hardware
stores in the plumbing section.
To Prevent Hose Pull Off
The inlet and outlet of the Dust Deputy® are shouldered and tapered to adapt
to a range of vac hose sizes. If on your model the friction fit isn't as tight as
needed you can do the following:
Use the included hose clamp and hose retention ring as shown on pg.10.
Wrap the inlet and outlet of the Dust Deputy with a layer of electrical tape
to increase the friction fit.
Secure with a sheet metal screw.
19
292.1mm
Dust Deputy® Owner's Manual © 2010
III. Ultimate Kit Contents
U.S. Patent #7,282,074 C1
U.S. Patent #D668409
U.S. Design Pat.
App. # 29/358,526
Dimensions
Box Capacity
is 9 Gallons /
34.2 Liters
Width
11 1/2"/
15 1/2"/
393.7mm
Dust Deputy® Owner's Manual © 2010
Ultimate Dust Deputy® - AXD000009
- Adaptor, Cuff 2.5" - 2.25" (1) AXD250225
- Elbow 2.5" w/ valve (1) AXD600101
* Optional Elbow 2.5" (1) AHA000004
- Rubber T-Latches (2) AFL000007
29/358,497
29/342,738
- Gasket for Cyclone (1) AXG000004
- Gasket Neoprene (4 ft.) RGZ000000
- Foam reticulated (6") RMF000060
- 9 gal. Molded Box (1) SDS090000
- Hose 2.5" x 5.5' (1) AXD250066
- Shut Off Valve (1) AXD600000
- Tubing 1/4" (3 ft.) AXD600200
- Plastic bags (3) AXD600300
- Anti-Static Metal Tape (12") VFA050015
- Plastic Cyclone (1) VXC110002
- Hardware AHK000009
- 1/4 - 20 x 3/4" Mach. Screw (6)
- 10 - 32 x 1" Mach. Screw (4)
31"/ 787.4mm
The included metal tape
can be used as shown on
the connectors to ground
them.
16"/ 406.4mm
Metal
tape
Metal
tape
4