Table of Contents
Advertisement
Installation adjustment mode
Adjustment Mode
Installation
The top cover of the projector should be removed in order to gain access to the adjustments.
Please refer to chapter 'Installation Guidelines' for how to remove the top cover.
Projector Distance
On the screen, a drawing will be displayed together with parameters indicating a correct installation position.
How to calculate the screen width ?
To change the screen width :
Push the cursor keys ç or è to highlight the item SW in the "Projector Distance 1" menu (menu 1)
1
2
Press TEXT.
After TEXT is pressed, the "Projector Distance 2" menu will be displayed on the screen (menu 2).
It allows the user to change the Screen width.
Push the cursor keys ç or è to highlight the digit needed to be changed, and enter the desired digit with the numeric keys on
3
the RCU or the local keypad.
4
Press ENTER to confirm the changes.
The projector will redisplay the "Projector Distance 1" menu with updated values for the three parameters.
5
Press ENTER to continue with the "Optical Lens Focusing".
If EXIT is pressed, the projector will return to the previous menu.
The same applies to the PD (projector distance). You can use the above-mentioned procedure to obtain a correct updated value
of SW (screenwidth) after entering a new value of PD (projector distance).
A = Correction value
PD= Perpendicular distance between screen and projector
SW= Screen width
SW = 2.6 m
PD= 3.64m
Select with arrow keys; <TEXT> to reprogram
<ENTER> to continue; <EXIT> to return.
WARNING: ONLY FOR STANDARD PROJECTORS !!
menu 2
7-2
Projector Distance
CRT Projection Angle Adjustment
$
A=12 cm
Optical Lens Focusing
Scheimpflug Adjustment
SCREENWIDTH =
Select with arrow keys; reprogram with numeric keys and
then <ENTER> to confirm.
Maximum screenwidth = 6 m
Maximum proj. distance = 8,1 m.
menu 2
5976065 BARCOCINE 8 10022000
Raster Centering
2
, 6 0 m
Advertisement
Table of Contents
