Table of Contents
Advertisement
Communications Parameters
The ASD (including the DEV002Z) acts as a follower device on the network. Use the parameters listed
below to set the communication options.
These settings can also be made by the use of configuration tools and the Electronic Data Sheet (EDS)
file. The EDS file can be downloaded from the Toshiba web site:
http://www.toshiba.com/ind/downloads_main.jsp.
Parameter
Communication Option (DeviceNet/
1
F830
Profibus) Setting
ASD Operation at Disconnect
F851
(Action to be carried out in the event
of communications loss)
F852
Preset Speed Operation Selection
Communications Option Station
F853
Address Monitor
Communications Option Speed
F854
Switch Monitor DeviceNet/
CC-Link
F899
Network Option Reset Settings
1 – See
Assembly Object – F830 Instance Details on pg. 21
Note:
When Communications parameters are changed either the power to the ASD must be
cycled, or F899 set to 1 and a Reset command received via the communications link,
for the changes to take effect.
Note:
When either F003 or F004 is set to Communication Input, the ASD operates without
Net Ref (Frequency Link) or Net Ctrl.
F830: Communications Option (DeviceNet/Profibus) Setting 1 — The Input/Output Instance of
DeviceNet card is set up at this parameter.
The DeviceNet card supports both the standard DeviceNet AC Drive profile Instances 20/70, 21/71 and
user-defined Instances 100/150, 101/151, and 102/152.
DeviceNet Module Installation and Operation Manual
Function
Adjustment Range
Instance 20/70
0:
Instance 21/71
1:
Instance 100/150
2:
Instance 101/151
3:
Instance 102/152
4:
5:
–
6:
–
7.
–
0: Stop and Terminate Communications
1: Do Nothing (continue programmed operation)
2: Deceleration Stop
3: Coast Stop
4: Emergency Off
5: Preset Speed (Operates at the Preset Speed operation
frequency set with F852)
0: Disabled, 1 to 15: Preset Speed number
Displays the MAC ID number assigned using the dip
switch to set a decimal equivalent range of 0 to 63
Displays the network communication speed set with the
dip switch
0: 125 kbps
1: 250 kbps
2: 500 kbps
0: Reset ASD only
1: Reset the DEV002Z and the ASD (see Notes below)
for an explanation of F830.
Default
Setting
0
0
0
0
0
0
11
Advertisement
Table of Contents
