Table of Contents
Advertisement
Connect the First Computer to the Gateway
Wireless Connection
Requires wireless-enabled notebook or a computer with an 802.11b/g wireless network adapter installed.
Wireless adapters can be purchased from your service provider.
Gateway 2701
Figure 2. Gateway Connected Via Wireless
Connect the provided AC power adapter from the 2Wire gateway's
1.
The
light on the front of the gateway should be green.
POWER
Connect the provided gray telephone cable from the gateway's
2.
DSL service.
Install your wireless adapter according to the manufacturer's instructions (see note below).
3.
Note:
If you use a 2Wire wireless adapter (PCI, PC card, or USB adapter) for wireless
networking, the 2Wire CD automatically configures it to communicate with the gateway
during setup. If you are NOT using a 2Wire wireless adapter, you must manually configure
your adapter to communicate with the gateway using the information on page 6.
Telephone wall jack
with DSL
2Wire
DSL filter
2
AC power
Computer
(with 802.11g wireless
adapter installed)
port to an electrical outlet.
POWER
port to a telephone jack with
PHONE LINE
5
Advertisement
Table of Contents
