Connect To Iptv; Setting Up Iptv - 2Wire 3800HGV-B User Manual

Connect to IPTV

Setting Up IPTV

While the 3700HGV-B supports MoCA directly connected to it, it will not be used by SBC during the
Controlled Launch. Instead MoCA or HomePNA will be terminated on an Ethernet over CoAX bridge (for
example, a Scientific Atlanta device or a Motorola NIM 100), which connects to an Ethernet port on the
3700HGV-B.
Note:
The NIM100 is independently powered, and should be installed close to a power outlet.
Refer to the manufacturer's instructions that came with the NIM100.
Connect a coaxial cable from the gateway's
1.
Connect an Ethernet cable from the NIM100's
2.
port to the NIM100's
CABLE LINE
port to the Ethernet port on the set top box.
Ethernet
port.
CABLE IN
12