Restoring The Function Settings To The Factory Set Values - A&D SJ-3000WP Instruction Manual

11.2. Restoring the function settings to the factory set values

1. Turn the power OFF.
2. Touch and hold the
switch to turn the power ON and to display
the software version. Release the
continue to touch the
no
with " " blinking is displayed.
3. Tap the
SAMPLE
Clrf no
" " changes to "
Clrf go
4. When "
The factory set values are restored. After displaying
end
" ", the scale goes to the weighing mode.
To cancel the restoring procedure, touch and hold the
switch to turn off the scale.
switch and touch the
TARE
switch until "
TARE
switch.
Clrf go
" with "
" is displayed, tap the
switch but
Clrf no
"
go
" blinking.
switch.
TARE
21
Tap
Tap