Entering The Comparator Values - A&D SJ-3000WP Instruction Manual

8.2. Entering the comparator values

1. In the weighing mode, touch and hold the
value setting mode.
2. Enter the comparator values using the following switches.
UNITS
SAMPLE
TARE
The minus sign can be set at the next digit of the least significant digit. The
switch alternates the minus sign on and off. The blinking "-" shows minus
SAMPLE
and no sign shows plus.
3. When the setting is complete, the scale memorizes the values and displays "
then returns to the weighing mode. (At this time, power-on-zero is not performed.)
Five-level
comparator mode
Touch
& hold
Tap
Tap
Tap
Tap
To shift the blinking digit to the right.
To increase the value of the blinking digit by one.
To store the setting value and to go to the next limit setting or "
Three-level
comparator mode
Weighing
mode
Touch
& hold
To set the
LOLO
limit value
Tap
To set the LO
limit value
Tap
To set the HI
limit value
To set the HIHI
limit value
Weighing
mode
switch to enter the comparator
UNITS
Weighing
mode
To set the LO
limit value
To set the HI
limit value
Weighing
mode
14
Seven-level
comparator mode
Touch
& hold
Tap
Tap
Tap
Tap
Tap
Tap
end
".
end
",
Weighing
mode
To set level 1
lower limit value
To set level 2
lower limit value
To set level 3
lower limit value
To set level 3
upper limit value
To set level 4
upper limit value
To set level 5
upper limit value
Weighing
mode