Fluke 719PRO User Manual page 58

719PRO
Users Manual
Command
Returns the value of the current being
SIM?
simulated.
Returns pressure value at which the
ST_CLOSE?
switch closed
Returns pressure value of the
ST_DEAD?
deadband of the switch
Returns pressure value at which the
ST_OPEN?
switch opened
ST_START Starts a switch test
Set the RTD to read in F or C on the
TEMP_UNIT
indicated display
TEMP_UNIT? Returns the unit the RTD is set to
VAL? Returns the measured values
ZERO_MEAS Zeros the pressure module
Returns the zero offset of the
ZERO_MEAS?
pressure module
48
Description
Table 7. Parameter Units
Units
CEL Temperature in degrees Celsius
CUSTOM Custom RTD type
DCI Current function
DCV Voltage measure function
External pressure measurement
EXT
function
FAR Temperature in degrees Fahrenheit
LOWER Designates Lower display
MA Milliamps of current
MEASURE Measure state
MEAS_LOOP Measure with loop power state
MIDDLE Designates Middle display
OHM Resistance in ohms
Meaning