Fluke 715 Instruction Sheet

Visit us at www.TestEquipmentDepot.com
Introduction
The Fluke 715 Volt/mA Calibrator is a source and measurement
tool for 0 to 24 mA current loop testing and dc voltage from 0 to
10 V. The calibrator does not source and measure
simultaneously.
Your calibrator is supplied with a Flex-Stand™ holster, a set of
test leads, an installed 9 V alkaline battery, and this instruction
sheet.
Function
dc mV input
dc mV output
dc V input
dc V output
dc mA input
dc mA output
Loop power
output
Volt/mA Calibrator
Summary of Calibrator Capabilities
Range
0 to 100 mV
0 to 10 V
0 to 24 mA
24 V dc output
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Instruction Sheet
715
Resolution
0.01 mV
0.001 V
0.001 mA
N/A
®