Safety Information - Fluke 719PRO User Manual

719PRO
Users Manual
To download manuals, or to view, print, or download the
latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.

Safety Information

A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
 Warning
To prevent possible electrical shock, fire, or
personal injury:
Only assemble and operate high-
pressure systems if you know the
correct safety procedures. High-pressure
liquids and gases are hazardous and the
energy from them can be released
without warning.
Read all safety information before you
use the Product.
Carefully read all instructions.
Do not use the Product around explosive
gas or vapor.
Use the correct terminals, function, and
range for measurements.
2
Do not apply more than the rated
voltage, between the terminals or
between each terminal and earth ground.
Do not touch voltages > 30 V ac rms,
42 V ac peak, or 60 V dc.
Remove all probes, test leads, and
accessories before the battery door is
opened.
Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.
Do not use and disable the Product if it
is damaged.
Remove the input signals before you
clean the Product.
Use only specified replacement parts.
Have an approved technician repair the
Product.
Use the Product only as specified, or the
protection supplied by the Product can
be compromised.