Ricoh MP C2003 Series User Manual page 232

10. Troubleshooting
Messages
"XXX cannot be YYY
because the device
certificate used for the S/
MIME signature is not
currently valid."
(XXX and YYY indicate the
user action.)
"XXX cannot be YYY
because there is a problem
with the device certificate
used for the S/MIME
signature. Check the device
certificate."
(XXX and YYY indicate the
user action.)
"XXX cannot be YYY
because the Digital
Signature's device certificate
is not currently valid."
(XXX and YYY indicate the
user action.)
"XXX cannot be YYY
because there is a problem
with the Digital Signature's
device certificate. Check the
device certificate."
(XXX and YYY indicate the
user action.)
• If a fax or an e-mail cannot be sent and a message appears which states that there is a problem
with the device certificate or user certificate, a new certificate must be installed. For details about
how to install a new certificate, see Security Guide.
230
Causes
The device certificate (S/
MIME) has expired.
There is no device certificate
(S/MIME), or the certificate
is invalid.
The device certificate (PDF
with digital signature or
PDF/A with digital
signature) has expired.
There is no device certificate
(PDF with digital signature or
PDF/A with digital
signature), or the certificate
is invalid.
Solutions
A new device certificate (S/MIME)
must be installed. For details about
how to install a device certificate (S/
MIME), see Security Guide.
For details about the device certificate
(S/MIME), see Security Guide.
A new device certificate (PDF with
digital signature or PDF/A with digital
signature) must be installed. For details
about how to install a device certificate
(PDF with digital signature or PDF/A
with digital signature), see Security
Guide.
A new device certificate (PDF with
digital signature or PDF/A with digital
signature) must be installed. For details
about how to install a device certificate
(PDF with digital signature or PDF/A
with digital signature), see Security
Guide.