Ricoh MP C2003 Series User Manual page 218

10. Troubleshooting
When data cannot be sent because there are too many documents or pages
Messages
"Exceeded max. number of
pages per file. Do you want
to store the scanned pages
as 1 file?"
"Exceeded max. number of
stored files. Cannot send the
scanned data as capturing
files is unavailable."
"Exceeded max. page
capacity per file. Press
[Send] to send the scanned
data, or press [Cancel] to
delete."
"Exceeded maximum
number of file to store.
Delete all unnecessary files."
When the WSD scanner function cannot be used
Messages
"Cannot communicate with
PC. Contact the
administrator."
"Cannot start scanning
because communication was
failed."
216
Causes
The file being stored has
exceeded the maximum
number of pages for one file.
Too many files are waiting to
be delivered.
The number of scanned
pages exceeded the
maximum page capacity.
Too many files are waiting to
be delivered.
Causes
WSD (Device) protocol or
WSD (Scanner) protocol is
disabled.
Scan Profile is not set on the
client computer.
Solutions
Specify whether to store the data or
not. Scan the pages that were not
scanned, and then store them as a new
file. For details about storing files, see
"Storing and Saving the Scanned
Documents", Scan.
Try again after they have been
delivered.
Select whether to send the data that
has already been scanned.
Try again after they have been
delivered.
Solutions
For details about how to enable or
disable the WSD protocol, see Security
Guide.
Set Scan Profile. For details about how
to do this, see "Creating a New Scan
Profile", Scan.