Ricoh MP C2003 Series User Manual page 180

10. Troubleshooting
Problems
Misfeeds occur frequently.
Misfeeds occur frequently.
178
Causes
Using curled paper often
causes misfeeds, soiled
paper edges, or slipped
positions while performing
staple or stack printing.
The tray's side or end fences
may not be set properly.
Solutions
• Take the stiffness out of the paper
with your hands to straighten out
the curl.
• Load the paper up side down so
that the curled edges face
downward. For details about
recommended paper, see
"Recommended Paper", Paper
Specifications and Adding Paper.
• Lay cut paper on a flat surface to
prevent paper from curling, and
do not lean it against the wall. For
details about the proper way to
store paper, see "Paper Storage",
Paper Specifications and Adding
Paper.
• Remove the misfed paper. For
details about removing jammed
paper, see "Removing Jammed
Paper", Troubleshooting.
• Check that the side or end fences
are set properly. For details about
setting the side and end fences,
see "Changing the Paper Size",
Paper Specifications and Adding
Paper.