Ricoh MP C2003 Series User Manual page 204

10. Troubleshooting
Messages
"Punch has been cancelled."
"Staple has been cancelled." Stapling printing was
When documents cannot be stored in the Document Server
Messages
"Cannot store data of this
size."
"Document Server is not
available to use. Cannot
store."
"Exceeded max. capacity of
Document Server. Cannot
store."
"Exceeded max. number of
files of Document Server.
Cannot store."
202
Causes
Punch printing was
canceled.
canceled.
Causes
The paper size exceeded
the capacity of the
Document Server.
You cannot use the
Document Server function.
The hard disk became full
after a file was stored.
The maximum file capacity
of the Document Server was
exceeded.
Solutions
Check the paper orientation, print
orientation, and then punch position.
Certain settings can produce print
results that might not be as expected.
Check the paper orientation, paper
quantity, print orientation, and staple
position. Certain settings can produce
print results that might not be as
expected.
Solutions
Reduce the paper size of the file that
you want to send to a size that the
Document Server can store. Custom
size files can be sent but not stored
afterward.
For details about using Document
Server function, contact your
administrator.
For details about how to set
permissions, see Security Guide.
Delete some of the files stored in the
Document Server or reduce the size
that you want to send.
Delete some of the files stored in the
Document Server.