Ricoh MP C2003 Series User Manual page 223

Messages
"Insufficient memory. Reduce
the scanning area."
"Invalid Winsock version.
Please use version 1.1 or
higher."
"No response from the
scanner."
"No response from the
scanner."
Causes
Scanner memory is
insufficient.
You are using an invalid
version of Winsock.
The machine or client
computer is not connected to
the network correctly.
The network is crowded.
Messages Displayed When Using the Scanner Function
Solutions
• Reset the scan size.
• Lower the resolution.
• Set with no compression. For
details about the settings, see
TWAIN driver Help.
The problem may be due to the
following cause:
• Scanning cannot be performed if
large values are set for brightness
when using halftone or high
resolution. For details about the
relationship between scan
settings, see "Relationship
between Resolution and Scan
Size", Scan.
• If a misfeed occurs, you might not
scan an original. Remove the
misfeed, and then scan the
original again.
Install the operating system of the
computer or copy Winsock from the
operating system CD-ROM.
• Check whether the machine or
client computer is connected to
the network correctly.
• Disable the client computer's own
firewall. For details about firewall,
see Windows Help.
Wait for a while, and then try to
reconnect.
221