Line Card Status Leds; 40-Port Gigabit Ethernet Line Card - Cisco ASR 9000 Series Installation Manual

Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router
Table 1-3
Ethernet Line Card
160 Gigabyte Modular Line Card, Service Edge
Optimized
20-Port GE Modular Port Adapter (MPA)
8-Port 10GE Modular Port Adapter (MPA)
4-Port 10GE Modular Port Adapter (MPA)
2-port 10GE Modular Port Adapter (MPA)
2-port 40GE Modular Port Adapter (MPA)
2-Port 10GE Modular Port Adapter (MPA)
1-Port 40GE Modular Port Adapter (MPA)
Use only small form-factor pluggable modules (SFP, SFP+, or XFP modules) supplied by
Caution
Cisco Systems, Inc. in the Cisco ASR 9000 Series line cards. Each module contains an internal serial
number that is security programmed by the module manufacturer with information that provides a way
for the Cisco IOS XR software to identify and validate the module as qualified to operate with Ethernet
line cards. Unapproved modules (those not purchased directly from Cisco) will work, but generate an
error message stating that the device is unsupported.

Line Card Status LEDs

All line cards have port status LEDs on their front panels. Each SFP or XFP port has an adjacent LED
to indicate the status of the associated port.
In addition, each line card has a single tristate Status LED to display card status. The display and
meaning of the Status LEDs are described in

40-Port Gigabit Ethernet Line Card

The 40-Port Gigabit Ethernet line card provides 20 double-stacked SFP (40 total) cages that support
either fiber-optic or copper Gigabit Ethernet transceivers.
The 40-Port Gigabit Ethernet line card is available in base, extended, and low-queue versions. All
versions are functionally equivalent, but vary in configuration scale and buffer capacity.
Each SFP cage on the 40-Port Gigabit Ethernet line card has an adjacent Link LED visible on the front
panel. The Link LED indicates the status of the associated SFP port, as described in
The front panel and connectors of the 40x1GE line card are shown in
OL-17500-08
Ethernet Line Card Hardware Comparison (continued)
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Ethernet Line Card Product Overviews
Product Number
A9K-MOD160G-SE
A9K-MPA-20X1GE
A9K-MPA-8X10GE
A9K-MPA-4X10GE
A9K-MPA-2X10GE
A9K-MPA-2X40GE
A9K-EP-2T
A9K-MPA-1X40GE
Table 2-1.
Figure
Number
of Ports Module Type
20 SFP
8 SFP+
4 XFP
2 XFP
2 QSFP+
2 XFP
1 QSFP+
Table 2-1.
1-1.
1-9