Required Tools; Installing The Cfp Transceiver - Cisco ASR 9000 Series Installation Manual

Required Tools

The dual SC connectors on the optical CFP transceivers support network interface cables with either
Note
Physical Contact (PC) or Ultra-Physical Contact (UPC) flat polished face types. The dual SC connectors
on the optical CFP transceivers do not support network interface cables with an Angle Polished
Connector (APC) polished face type.
Table 1-15
receive specifications for 100-Gigabit CFP transceivers.
The minimum cabling distance for the optical CFP transceivers is 6.56 feet (2 meters).
Note
Table 1-15
SFP+ Transceiver
Module Model
CFP-100G-LR4
Required Tools
You will need these tools to install the CFP transceiver module:
•
•
•

Installing the CFP Transceiver

The CFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual
Caution
grounding device when handling the CFP transceivers or coming into contact with the modules.
To install a CFP transceiver, follow these steps:
Remove the CFP transceiver from its protective packaging.
Step 1
Check the label on the CFP transceiver body to verify that you have the correct model for your network.
Step 2
Step 3 Remove the dust plug from the CFP transceiver module optical port and set it aside.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-84
lists the 100-Gigabit CFP port cabling specifications.
CFP Transceiver Module Optical Transmit and Receive Specifications
Transceiver Type
100GBASE-LR4,
1310-nm SMF
Small flat-blade screwdriver for removing the CFP transceiver socket cover.
Wrist strap or other personal grounding device to prevent electro-static discharge (ESD)
occurrences.
Fiber-optic end-face cleaning tools and inspection equipment. For complete information on
inspecting and cleaning fiber-optic connections, See the
on page 1-104.
Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router
Table 1-15
Transmit Receive Power
Power (dBm) (dBm)
4.5 per lane 4.5 per lane
(Max) (Max)
–4.3 per lane –10.6 per lane
(Min) (Min)
"Cleaning Fiber-Optic Connectors" section
lists the optical transmit and
Transmit and Receive
Wavelength (nm)
Four lanes:
1295.6
1300.1
1304.6
1309.1
OL-17500-08