Removing A Line Card Cable-Management Bracket - Cisco ASR 9000 Series Installation Manual

Line Card Cable Management
Position the cable-management bracket over the front of the line card front panel.
Step 2
Figure 1-58
Step 3 Insert and tighten the captive screw(s) to secure the bracket to the line card (see
Starting with the port on the line card closest to the bracket, connect each interface cable to the intended
Step 4
port (see

Removing a Line Card Cable-Management Bracket

To remove a line card cable-management bracket, follow these steps (see
Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 1
Step 2 Note the current interface cable connections to the ports on each line card.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-98
Cable-Management Bracket Installation and Removal
Figure 1-57).
Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router
Figure 1-58).
Figure 1-58):
OL-17500-08