4-Port 10-Gigabit Ethernet Line Card - Cisco ASR 9000 Series Installation Manual

Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router
Ethernet Line Card Product Overviews
For more information, see the "Cabling Description" section on page 1-99.

4-Port 10-Gigabit Ethernet Line Card

The 4-Port 10-Gigabit Ethernet line card provides four cages for XFP Ethernet optical interface modules
that operate at a rate of 10 Gbps. The four XFP modules can be 10-Gigabit Ethernet multimode
connections (see Table A-6).
The 4-Port 10-Gigabit Ethernet line card is available in base, extended, and low-queue versions. All
versions are functionally equivalent, but vary in configuration scale and buffer capacity.
Each XFP cage on the 4-Port 10-Gigabit Ethernet line card has an adjacent Link LED visible on the front
panel. The Link LED indicates the status of the associated XFP port, as described in Table 2-1.
Figure 1-3 shows the front panel and connectors of the 4-Port 10-Gigabit Ethernet line card.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-13
OL-17500-08