Cabling Description; Gigabit Ethernet Interfaces - Cisco ASR 9000 Series Installation Manual

Aggregation services router ethernet line card
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Chapter 1
Installing Line Cards in the Cisco ASR 9000 Series Router
Starting with the interface cable for the bottom port on the line card, disconnect the cable from the line
Step 3
card interface.
Repeat
Step 4
to
Step
Loosen the captive installation screw on the cable-management bracket and remove the bracket from the
Step 5
line card (see
For information on connecting and disconnecting interface cables, see the
Fiber-Optic Interface Cables" section on page

Cabling Description

The following sections provide basic information about cabling for line cards:

Gigabit Ethernet Interfaces

This section briefly describes the Gigabit Ethernet interfaces:
Gigabit Ethernet SFP Modules
The 40-Port Gigabit Ethernet line card and the Gigabit Ethernet ports of the 2-Port 10-GE + 20-Port GE
combination line card use SFP modules. The Gigabit Ethernet laser optical transceiver module is a
field-replaceable small form-factor pluggable (SFP) module that plugs into the receptacle (or cage)
located on the line card and provides the Gigabit Ethernet optical interface (see
module has two optical interfaces—laser transmit (TX) and laser receive (RX)—and an electrical
interface (to the line card).
The SFP+ modules used on the 16-Port 10-Gigabit Ethernet oversubscribed line card are enhanced SFP
modules.
OL-17500-08
Step 3
for all remaining interface cables, proceeding from the bottom ports upward, then proceed
5.
Figure
1-58).
Gigabit Ethernet Interfaces, page 1-99
Fiber-Optic Interface Cables, page 1-101
Installing and Removing Fiber-Optic Interface Cables, page 1-102
Cleaning Fiber-Optic Connectors, page 1-104
Type RJ-45 10/100/1000BASE-T Copper Cables, page 1-104
Removing and Installing RJ-45 10/100/1000BASE-T Copper Cables, page 1-105
Gigabit Ethernet SFP Modules, page 1-99
10-Gigabit Ethernet XFP Modules, page 1-101
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-102.
Cabling Description
"Installing and Removing
Figure
1-59). The
1-99

Advertisement

Table of Contents
loading

Table of Contents