Chapter 3: Advanced Configuration; How To Access The Wireless Network Monitor; How To Use The Wireless Network Monitor; Status - Cisco Linksys WUSB600N User Manual

Chapter3
Chapter 3:
Advanced Confguraton
Advanced configuration is performed through the Wireless
Network Monitor (the Monitor). Use it to check the status
information, search for available wireless networks, or
create profiles that hold different configuration settings.
Diagnostics is performed through the Diagnostic utility.
Use it to detect the Adapter, test the driver and Monitor,
and troubleshoot if needed.
How to Access the Wireless Network
Monitor
After installing the Adapter, the Monitor icon appears in
the system tray of your computer. If the Monitor is enabled,
the icon is green. If the Monitor is disabled or the Adapter
is not inserted, the icon is gray.
Wireless Network Monitor Icon
Double-click the icon to open the Monitor.

How to Use the Wireless Network Monitor

The opening screen of the Monitor is the Status screen.
From this screen, you can find out how strong the current
wireless signal is and how good the connection's quality
is. You can also click the Wi-Fi Protected Setup button
connect to a router that supports Wi-Fi Protected Setup.
NOTE: The Adapter supports Wi-Fi Protected
Setup, which is a feature that makes it easy to
set up your wireless network.
Click More Informaton to view additional status
information about the current connection. To search for
available wireless networks, click the Connect tab. To
perform configuration changes or create connection
profiles, click the Profles tab.

Status

The Status screen displays network mode, signal strength,
and link quality information about the current connection.
It also displays the Wi-Fi Protected Setup button. Click
More Informaton for additional status information.
Wi-Fi Protected Setup Button
Dual-Band Wreless-N USB Network Adapter
Sgnal Strength
strength.
Lnk Qualty The Link Quality bar indicates the quality of
the wireless network connection.
More Informaton
additional information about the wireless network
connection on the Wireless Network Status screen.
W-F Protected Setup
button to connect to a router that supports Wi-Fi
Protected Setup. Proceed to the "Wi-Fi Protected Setup"
section.
Wi-Fi Protected Setup
NOTE:
to
Protected Setup.
Before you begin, make sure the router and the computer
with the Adapter are in the same room. Then select the
method that is most convenient for you.
Advanced Configuration
Status
The Signal Strength bar indicates signal
Click More Informaton to view
Click the W-F Protected Setup
Make sure the router supports Wi-Fi
Select a Method
3