Table of Contents
Advertisement
Connecting the Router to Power
This chapter describes how to connect the Cisco 1120 Connected Grid Router to AC and DC power
source, and includes the following sections:
•
•
•
•
•
Before You Begin
Before you connect power to the router, read the following topics in this section:
•
•
•
•
Verify Router Hardware Readiness
Before connecting the router to power, verify the following:
•
•
OL-26438-02
Before You Begin, page 5-1
AC Power Connection Information, page 5-4
Connect to AC Power, page 5-7
Connect to DC Power (Optional), page 5-9
Power Cycling the Router, page 5-10
Verify Router Hardware Readiness, page 5-1
Tools and Materials You Supply, page 5-2
EMC Class A Notices and Warnings (US and Canada), page 5-2
Safety Information, page 5-3
The unit is grounded as described in the chapter
The SD flash memory module is installed correctly as described in the chapter
Memory Module
C H A P T E R
Mounting the Router
Cisco 1120 Connected Grid Router Hardware Installation Guide
5
Using the SD Flash
5-1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cisco ASR 5000 Application Detection and Control Administration Guide and is the answer not in the manual?
Questions and answers