Ground The Router - Cisco ASR 5000 Application Detection and Control Administration Guide Hardware Installation Manual

Ground the Router

Wall-Mount Location
Identify an area on a wall that meets the safety, space, and environmental requirements described in the
chapter
Wall-Mount Height
The router should be mounted at a height at which you are able to view the top of the module-side panel
and at which the cables are able to be managed without adding stress to the router ports.
Wall-Mount Hardware Distance
The hardware you provide should be mounted the correct distance apart so that the router wall mount
holes (Item 1,
Figure 4-6
1
Ground the Router
You must ground the router with the grounding lug on the chassis exterior as described in this section.
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Cisco 1120 Connected Grid Router Hardware Installation Guide
4-8
Installation Safety and Site
Figure 4-6) can be hung on the hardware 7.30 inches (185.4 mm).
Distance for Wall-Mounting Hardware
Preparation.
7.30 inches
(185.4 mm)
Chapter 4 Mounting the Router
y
OL-26438-02