Before You Begin; Unpacking The Router - Cisco IR8300 Installing And Connecting

ステートメント 191 日本向け VCCI クラス A に関する警告

警告

Statement 1008 Class 1 Laser Product

Warning

ステートメント 1008 クラス 1 レーザー製品

警告

Before You Begin

Before installing and connecting a Cisco IR8340 router, read the safety warnings and gather the following

tools and equipment:

• ESD-preventive cord and wrist strap

• Number 2 Phillips screwdriver

• 0# Phillips screwdriver

• Screws that fit your rack

In addition, depending on the type of modules you plan to use, you might need the following equipment to

connect a port to an external network:

• Cables for connection to the WAN and LAN ports (dependent on configuration).

• PC with a network interface card for connection to an Ethernet (LAN) port.

Do not unpack the router until you are ready to install it. If the final installation site will not be ready for some

time, keep the chassis in its shipping container to prevent accidental damage. When you are ready to install

the router, proceed with unpacking it.

Installing and Connecting the Router

この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことが

あります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。

This product is a Class 1 laser product.

クラス 1 レーザー製品です。

Installing and Connecting the Router

VCCI-A

Table of Contents

Ir8340