Ac Power Connection Information; Router Power Source Input Terminals - Cisco ASR 5000 Application Detection and Control Administration Guide Hardware Installation Manual

AC Power Connection Information

AC Power Connection Information
This section provides information you need to connect the router to AC power and includes the following
topics:
•
•
•

Router Power Source Input Terminals

The Cisco CGR 1120 Router has two sets of terminals for power input (see
•
•
Figure 5-1
Figure 5-1
Cisco 1120 Connected Grid Router Hardware Installation Guide
5-4
Router Power Source Input Terminals, page 5-4
Electrical Wire Color Codes, page 5-5
Terminal Blocks and Mating Connectors for Power Input Wiring, page 5-6
A set of five terminals for AC-input power source wires
A set of two terminals for DC-input power source wires
Router Power Source Input Terminals
1
shows the label for each terminal.
Chapter 5 Connecting the Router to Power
Figure 5-1):
2
OL-26438-02