Terminal Blocks And Mating Connectors For Power Input Wiring - Cisco ASR 5000 Application Detection and Control Administration Guide Hardware Installation Manual

AC Power Connection Information
Table 5-3
Color
Black
Red

Terminal Blocks and Mating Connectors for Power Input Wiring

The router ships with two power terminal blocks that are used to connect power input wires to the power
input mating connectors on the router.
•
•
Figure 5-2
.
1
Item Description
1
2
3
Cisco 1120 Connected Grid Router Hardware Installation Guide
5-6
DC Power Electrical Wiring Colors
Description
Negative
Positive
Figure 5-2 shows the AC-input terminal block.
Figure 5-3 show the DC-input terminal block.
AC-Input Terminal Block
2
Captive screws, for connecting terminal block to mating connector on the router 2
Terminal openings for inserting AC-input source wires
Screws for tightening wires into terminal openings
3
Chapter 5 Connecting the Router to Power
Quantity
5
5
OL-26438-02