Mounting Procedures; Module Panel (Front Panel) Features - Cisco ASR 5000 Application Detection and Control Administration Guide Hardware Installation Manual

Hardware Features
Table 3-2
Item
1
2
3

Mounting Procedures

For instructions on how to mount the router using the mounting bracket kit, see the chapter
the

Module Panel (Front Panel) Features

Figure 3-4
The module panel labels appear inverted when the router rests on its base (see
Note
orientation is designed to be read when the router is installed on a DIN rail.
Cisco 1120 Connected Grid Router Hardware Installation Guide
3-6
Mounting Features (Shown in
Feature
DIN rail
Mounting keyhole (2)
Mounting bracket
Router.
Module Panel (Front Panel) Features
1
5 6
Figure 3-3)
Description
Standard rail type used for mounting industrial control
equipment on an equipment rack.
Use the mounting keyholes on the mounting bracket to mount the
router on a wall.
Included as part of the mounting kit. Use this bracket when
mounting the router on a wall or DIN rail.
2 3
Chapter 3 Router Hardware Description
Mounting
Figure 3-4). The label
4
7
OL-26438-02