Table of Contents
Advertisement
Chapter 8
About Connected Grid Antennas
Installing or Replacing Module Antennas
Depending on the configuration you specified, the router could arrive in the shipping container with all
required antennas already installed and connected to the corresponding Cisco Connected Grid modules,
also installed in the router.
However, you might need to install an antenna when:
•
•
•
Where to Find Antenna Installation Information
For instructions on how to install or replace antennas on the router, see the Cisco Connected Grid
antenna documentation on Cisco.com, at:
Table 8-2
Title
Cisco Connected Grid Antennas
Installation Guide
Cisco Connected Grid Antennas
Overview
Choosing Your Cisco Connected Grid
Antenna
OL-26438-02
You purchase a module separately from the router. The antenna is included with the module, and
must be installed on the router to complete the module installation.
You purchase an antenna separately to replace a faulty or damaged antenna.
The antenna form factor prevents requires that it be installed after the router has shipped.
Connected Grid Modules for CGR 1000 Series Routers Documentation
www.cisco.com/go/cg-modules
Description
Installation procedures and safety information for all models
of Cisco Connected Grid antennas.
An overview of antenna technology, antenna types, and
Cisco Connected Grid antennas and accessories.
A decision tree to help you choose the correct antennas for
your platform and physical environment.
Cisco 1120 Connected Grid Router Hardware Installation Guide
Installing or Replacing Module Antennas
8-5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cisco ASR 5000 Application Detection and Control Administration Guide and is the answer not in the manual?
Questions and answers