Installing The Router Ground Connection - Cisco 860 Installing Manual

Chapter 2 Installing the Router
Figure 2-42
1
2
Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the
Step 4
"Installing Cisco 890 Series in a Rack" section on page

Installing the Router Ground Connection

The router must be connected to a reliable earth ground. Install the ground wire in accordance with local
electrical safety standards.
•
•
Router Mounted on the Wall
4
Two number-10 wood screws mounted on the
wall
Wall-mount holes
For NEC-compliant grounding, use size 14 AWG (2 mm
with an inner diameter of 1/4 in. (5 to 7 mm).
For EN/IEC 60950–compliant grounding, use size 18 AWG (1 mm
1
2
3 Horizontal surface on which to place the
power adapter
4 Distance between the screw head and the wall,
1/8 in. (0.32 cm)
2-56.
Cisco Integrated Services Router Hardware Installation Guide
Installing the Cisco 860, 880, 890 ISR
1
3
2
) or larger copper wire and a ring terminal
2
) or larger copper wire.
2-47