Adaptec 29320ALP Installation Manual page 7

Scsi card

Hide thumbs Also See for 29320ALP:

The Adaptec SCSI Card 29320ALP has one internal LVD/SE

connector to which you can connect internal SCSI devices.

Note: Adaptec recommends that you keep your Ultra320/160

and Ultra2 SCSI devices separate from your Ultra SCSI

devices. If you connect a legacy SCSI hard disk drive to the

Adaptec SCSI Card 29320ALP LVD/SE connectors, the

Ultra320/160 and Ultra2 SCSI hard disk drives will slow to

Ultra SCSI performance levels.

Follow these steps to connect your internal Ultra320/160 and

Ultra2 devices:

Locate a 68-pin internal LVD SCSI cable, which may have either

twisted wires or flat wires, shown as follows.

Terminated end

Nonterminated end

Table of Contents