ZyXEL Communications P-873HNU-51B User Manual page 93

Figure 30 Network Settings > Wireless > WPS
The following table describes the labels in this screen.
Table 19 Network Settings > Wireless > WPS
LABEL
Enable WPS
Method 1
Connect
Method 2
Register
Method 3
Release
Configuration
P-873HNU(P)-51B User's Guide
DESCRIPTION
Select Enable to activate WPS on the VDSL Router.
Use this section to set up a WPS wireless network using Push Button
Configuration (PBC).
Click this button to add another WPS-enabled wireless device (within wireless
range of the VDSL Router) to your wireless network. This button may either be a
physical button on the outside of device, or a menu button similar to the
Connect button on this screen.
Note: You must press the other wireless device's WPS button within two minutes
of pressing this button.
Use this section to set up a WPS wireless network by entering the PIN of the
client into the VDSL Router.
Enter the PIN of the device that you are setting up a WPS connection with and
click Register to authenticate and add the wireless device to your wireless
network.
You can find the PIN either on the outside of the device, or by checking the
device's settings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the VDSL Router.
Use this section to set up a WPS wireless network by entering the PIN of the
VDSL Router into the client.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the VDSL Router.
Chapter 7 Wireless
93