Subscribe to Our Youtube Channel
Related Manuals for ZyXEL Communications P-873HNU(B)-51B
Summary of Contents for ZyXEL Communications P-873HNU(B)-51B
- Page 1 P-873HNU(P)-51B Wireless N VDSL2 Bonding Combo WAN Gateway with USB Firmware Version 1.10 Edition 2, 4/2012 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 User Name: admin Password: 1234 Copyright 2012 ZyXEL Communications Corporation www.zyxel.com...
- Page 2 Device Panels POWER POWER RESET ETHERNET 1-4 HPNA (P-873HNUP-51B only) ETHERNET WAN ETHERNET WAN DSL 1 DSL 2 INTERNET ETHERNET 1-4 HPNA (P-873HNUP-51B only) WLAN/WPS DSL 1 DSL 2...
-
Page 3: Hardware Setup
P-873HNU(P)-51B Requirements Make sure you have the following things before you start: • INTERNET ACCESS: You need an Internet account with an ISP (Internet Service Provider) and information such as your user name, password, and so on. • WEB BROWSER: Internet Explorer 6.0 and later versions, with JavaScript enabled, or Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions. - Page 4 To connect your P-873HNU(P)-51B: (P-873HNUP-51B only)
- Page 5 P-873HNU(P)-51B 1. Attach the antenna and point it up. 2. Do one of the following for your Internet connection: a. DSL 1,2: Use a telephone cable to connect your P-873HNU(P)-51B’s DSL1 port to a telephone jack (or the DSL or modem jack on a splitter if you have one).
-
Page 6: Set Up A Wireless Network
• The USB light turns on when your P-873HNU(P)-51B detects a connected USB device. • The HPNA light (P-873HNUP-51B only) stays on if the HPNA port is properly connected and blinks when there is traffic. • The DSL1,2 lights are green when your P-873HNU(P)-51B has an ADSL connection. - Page 7 P-873HNU(P)-51B Follow these steps to add a WPS-enabled device to the wireless network using the WPS/WLAN button. Place the devices you want to connect near one another. Press the WPS button on the P-873HNU(P)- 51B. The WPS light blinks green and orange. Press the WPS button on a compatible device within 2 minutes of pressing the button on the P- 873HNU(P)-51B.
-
Page 8: The Web Configurator
The Web Configurator The Web Configurator is a web browser tool that allows you to configure the P- 873HNU(P)-51B. The computer and the P-873HNU(P)-51B need to be in the same IP address range to use this tool. 1. Open your browser and enter http://192.168.1.1 (the P-873HNU(P)-51B’s default IP address) as the address. - Page 9 P-873HNU(P)-51B 3. A welcome screen appears with details about your last login. Select Show this page next time to see the welcome screen on your next login. Otherwise, clear it. Click Continue. 4. The Network Map page appears. This shows whether the P-873HNU(P)- 51B and computers/devices connected to it have Internet access.
- Page 10 5. Click Status to display the following screen, where you can view the P- 873HNU(P)-51B’s device, interface, and system information.
- Page 11 P-873HNU(P)-51B 6. Click Quick Start and configure the P-873HNU(P)-51B’s time zone Internet access, and wireless settings. See your User’s Guide for how to use the rest of the Web Configurator screens. You will need to refer to the section on how to setup the Broadband connection if the INTERNET LED (light) remains off.
Need help?
Do you have a question about the P-873HNU(B)-51B and is the answer not in the manual?
Questions and answers