The Hpna Screen; The 5Th Ethernet Port Screen - ZyXEL Communications P-873HNU-51B User Manual

Chapter 8 Home Networking
The following table describes the fields in this screen.
Table 27 Network Settings > Home Networking > STB Vendor ID
LABEL
Vendor ID 1 ~ 5
Apply
Cancel

8.8 The HPNA Screen

Click Network Settings > Home Networking > HPNA to open this screen. Use this screen to
enable or disable the HPNA port. See
Figure 44 Network Settings > Home Networking > HPNA
The following table describes the fields in this screen.
Table 28 Network Settings > Home Networking > HPNA
LABEL
State
Apply
Cancel

8.9 The 5th Ethernet Port Screen

If you are using DSL connection, you can configure your Ethernet WAN port as an extra LAN port.
This fifth Ethernet port provides faster speed since it is a Gigabit port. Click Network Settings >
Home Networking > 5th Ethernet Port to open this screen.
Figure 45 Network Settings > Home Networking > 5th Ethernet Port
124
DESCRIPTION
Enter the STB's vendor ID.
Click Apply to save your changes back to the VDSL Router.
Click Cancel to exit this screen without saving.
Chapter 1 on page 19
DESCRIPTION
Select Enable to activate the HPNA port on the VDSL Router.
Click Apply to save your changes back to the VDSL Router.
Click Cancel to exit this screen without saving.
for more information on HPNA.
P-873HNU(P)-51B User's Guide