ZyXEL Communications P-873HNU-51B User Manual page 49

Tutorial: NAT Port Forwarding Setup
D=192.168.1.34
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see Section 11.2 on page 154
Click Network Settings > NAT > Add new rule and configure the screen with the following
1
values:
Service Name
WAN Interface
External Port/s
Server IP Address
Protocol
The screen should look as follows. Click Apply.
2
The port forwarding settings you configured appear in the table. The VDSL Router forwards port
3
666 traffic to the computer with IP address 192.168.1.34.
P-873HNU(P)-51B User's Guide
LAN
port 666
for more information).
Doom_Server
Select the WAN interface through which the Doom service is forwarded.
This example uses MyDSLConnection.
Enter 666 as the Start and End port.
Enter the IP address of the Doom server. This is 192.168.1.34 for this
example.
Select TCP/UDP. This should be the protocol supported by the Doom
server.
Chapter 4 Tutorials
WAN
A
49