Table of Contents
Advertisement
Chapter 2 The Web Configurator
Table 3 Navigation Panel Summary (continued)
LINK
Home
Networking
Routing
QoS
NAT
DNS Setting
IGMP Setting
Interface
Group
Security Settings
Firewall
MAC Filter
30
TAB
FUNCTION
LAN Setup
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP
Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP
Use this screen to turn UPnP and UPnP NAT-T on or off.
STB Vendor ID
Use this screen to have the VDSL Router automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP addresses.
HPNA
Use this screen to enable or disable the HPNA port.
5th Ethernet
Use this screen to configure the Ethernet WAN port as a LAN port.
Port
LAN VLAN
Use this screen to control the VLAN ID and IEEE 802.1p priority tags of
traffic sent out through individual LAN ports.
Static Route
Use this screen to view and set up static routes on the VDSL Router.
Policy
Use this screen to configure policy routing on the VDSL Router.
Forwarding
General
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup
Use this screen to configure QoS queues.
Class Setup
Use this screen to define a classifier.
Policer Setup
Use these screens to configure QoS policers.
Monitor
Use this screen to view QoS packets statistics.
Port Forwarding
Use this screen to make your local servers visible to the outside world.
Applications
Use this screen to configure servers behind the VDSL Router.
Port Triggering
Use this screen to change your VDSL Router's port triggering settings.
DMZ
Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG
Use this screen to enable or disable SIP ALG.
Sessions
Use this screen to limit the number of NAT sessions a single client can
establish.
DNS Entry
Use this screen to view and configure DNS routes.
Dynamic DNS
Use this screen to allow a static hostname alias for a dynamic IP address.
General
Use this screen to configure general IGMP proxy and IGMP packet
processing settings.
IGMP Filter
Use this screen to control IGMP access.
IGMP ACL
Use this screen to block or allow access to specific multicast media
channels.
Interface Group
Use this screen to map a port to a PVC or bridge group.
General
Use this screen to configure the security level of your firewall.
Protocol
Use this screen to add or remove predefined Internet services and
configure firewall rules.
Access Control
Use this screen to enable specific traffic directions for network services.
MAC Filter
Use this screen to block or allow traffic from devices of certain MAC
addresses to the VDSL Router.
P-873HNU(P)-51B User's Guide
Advertisement
Table of Contents
