Table of Contents
Advertisement
Chapter 31 Configuration
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your VDSL Router.
Table 106 Restore Configuration
LABEL
File Path
Browse...
Upload
Do not turn off the VDSL Router while configuration file upload is in
progress.
After the VDSL Router configuration has been restored successfully, the login screen appears. Login
again to restart the VDSL Router.
The VDSL Router automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 135 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
Appendix A on page 275
If the upload was not successful, the following screen will appear. Click OK to go back to the
Configuration screen.
Figure 136 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the VDSL
Router to its factory defaults. The following warning screen appears.
254
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
for details on how to set up your computer's IP address.
P-873HNU(P)-51B User's Guide
Advertisement
Table of Contents
