Table of Contents
Advertisement
Chapter 4 Tutorials
Note: Your VDSL Router has a WPS button located on its front panel as well as a WPS
button in its configuration utility. Both buttons have exactly the same function: you
can use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The VDSL Router sends the proper configuration settings to the wireless client. This may take up to
two minutes. The wireless client is then able to communicate with the VDSL Router securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both VDSL Router and wireless client.
Example WPS Process: PBC Method
Wireless Client
PIN Configuration
When you use the PIN configuration method, you need to use both the VDSL Router's web
configurator and the wireless client's utility.
Launch your wireless client's configuration utility. Go to the WPS settings and select the PIN method
1
to get a PIN number.
Log into VDSL Router's web configurator and go to the Network Settings > Wireless > WPS
2
screen. Enable the WPS function and click Apply.
42
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
ZyXEL Device
WPS
Press and hold for
5 seconds
P-873HNU(P)-51B User's Guide
Advertisement
Table of Contents
