ZyXEL Communications P-873HNU-51B User Manual page 62

Chapter 5 Network Map and Status Screens
Table 5 Status Screen (continued)
LABEL
DHCP
WLAN Information
MAC Address
Status
Name (SSID)
Channel
Security Mode
802.11 Mode
WPS
Interface Status
Interface
Status
Rate
System Status
System Up
Time
Current Date/
Time
System Resource
62
DESCRIPTION
This field displays what DHCP services the VDSL Router is providing to the LAN.
Choices are:
Server - The VDSL Router is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The VDSL Router acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
None - The VDSL Router is not providing any DHCP services to the LAN.
This shows the wireless adapter MAC (Media Access Control) Address of your
device.
This displays whether WLAN is activated.
This is the descriptive name used to identify the VDSL Router in a wireless LAN.
This is the channel number used by the VDSL Router now.
This displays the type of security mode the VDSL Router is using in the wireless
LAN.
This displays the type of 802.11 mode the VDSL Router is using in the wireless
LAN.
This displays whether WPS is activated.
This column displays each interface the VDSL Router has.
This field indicates whether or not the VDSL Router is using the interface.
For the LAN interfaces, the Ethernet WAN interface, or the HPNA interface, this
field displays Up when the VDSL Router is using the interface and NoLink when
the line is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or InActive
when WLAN is disabled.
For the DSL interface, this field displays NoLink (line is down), Up (line is up or
connected) if you're using Ethernet encapsulation and NoLink (line is down), Up
(line is up or connected), Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE encapsulation.
For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission
rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN
is enabled or N/A when WLAN is disabled.
This field displays how long the VDSL Router has been running since it last
started up. The VDSL Router starts up when you plug it in, when you restart it
(Maintenance > Reboot), or when you reset it.
This field displays the current date and time in the VDSL Router. You can change
this in Maintenance> Time Setting.
P-873HNU(P)-51B User's Guide