ZyXEL Communications P-873HNU-51B User Manual page 112

Chapter 8 Home Networking
Figure 39 Network Settings > Home Networking > LAN Setup
The following table describes the fields in this screen.
Table 23 Network Settings > Home Networking > LAN Setup
LABEL
Group Name
LAN IP Setup
IP Address
Subnet Mask
DHCP Server State
DHCP
112
DESCRIPTION
Select the interface group name for which you want to configure LAN settings.
See Chapter 14 on page 183
Enter the LAN IP address you want to assign to your VDSL Router in dotted
decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your VDSL Router automatically computes the
subnet mask based on the IP Address you enter, so do not change this field
unless you are instructed to do so.
Select Enable to have the VDSL Router act as a DHCP server or DHCP relay
agent.
Select Disable to stop the DHCP server on the VDSL Router.
Select DHCP Relay to have the VDSL Router forward DHCP request to the
DHCP server.
for how to create a new interface group.
P-873HNU(P)-51B User's Guide