Table of Contents
Advertisement
Appendix A Setting up Your Computer's IP Address
Figure 166 Macintosh OS X: Network
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your VDSL Router in the Router address box.
Click Apply Now and close the window.
5
Turn on your VDSL Router and restart your computer (if prompted).
6
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release
version.
Note: Make sure you are logged in as the root administrator.
290
P-873HNU(P)-51B User's Guide
Advertisement
Table of Contents
