Adjusting The Picture Quality - Denon DVD-3800 Operating Instructions Manual

ENGLISH

11 ADJUSTING THE PICTURE QUALITY

Press the PIC.ADJ button during playback.
1
Use the 0 and 1 cursor buttons to select the
picture memory, then press the ENTER button.
• The display switches as follows:
STD (STANDARD) ´ M1 (MEMORY 1) ´ M2 ´
M3 ´ M4 ´ M5
2
STD (Factory default)
When this is selected, both the picture quality and
function are reset to factory setting.
M1 to M5
Picture quality settings you have adjusted can be
stored here.
Select the item to change using 0 and 1 buttons.
ADJUST MODE
• The contrast , brightness , sharpness and color
(HUE) can be adjusted.
• Perform steps 4 and 5 to adjust the picture quality
3
(ADJUST MODE).
GAMMA
• Select this if dark portions of the picture are too
dark or bright portions are too bright.
• Perform steps 7 and 8 to adjust the gamma
correction (GAMMA).
Press the ª cursor button to select the adjust mode,
then use the 0 and 1 cursor buttons to select the
image quality adjustment item.
CONTRAST
Adjusts the contrast of the image.
BRIGHTNESS
4
Adjusts the picture's brightness.
SHARPNESS
Adjusts the sharpness of the picture.
HUE (-6 ~ +6)
Adjusts the balance of the green and red. (This does
not affect Progressive Scan images.)
44
(-6 ~ +6)
(0 ~ +12)
(-6 ~ +6)
2, 3, 4, 5, 7, 8
2, 6, 9
PIC.ADJ
Remote control unit
P I C TURE MODE
STD
Remote control unit
ENTER
Remote control unit
MEMORY 1
Remote control unit
MEMORY 1
CONTRAST
Remote control unit
Remote control unit
TOP MENU DISPLAY
ENTER
MENU PLAY
STILL /
STOP
PAUSE
SKIP SLOW / SEARCH
ANGLE SUBTITLE AUDIO SEARCH MODE
REPEAT A-B RANDOM MARKER
SETUP DIMMER PIC.ADJ P.D.MEMORY
1
ZOOM PAGE
M 1 M 2 M 3 M 4 M 5
GAMMA
0 0 0 0
GAMMA
0 0 0 0