Part Identification Chart - Weider 215 Bench User Manual

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part from the PART LIST on page 14. Important: Some parts may
have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to
see if it has been pre-assembled.
M6 Washer (20)
M8 Washer (12)
M8 Zinc
Washer (35)
M10 Washer (26)
M8 Zinc Nylon
Locknut (36)
M8 Nylon
Locknut (13)
M10 Nylon
Locknut (25)
M10 x 137mm Bolt (28)
5
M6 x 16mm
Screw (21)
M6 x 38mm Screw (22)
M8 x 43mm
Carriage Bolt (29)
M8 x 53mm Bolt (14)
M10 x 55mm Bolt (30)
M10 x 52mm Bolt Set (24)