Test Software; Ptcr-20 Software Operation - Bosch GVS1000 Operation Manual

24 en | Test Software
6

Test Software

A test program, PTCR-20, is provided for system maintenance. It is strongly advised that this
program is used only when necessary. The user can validate operation and set operational
parameters. If settings are changed incorrectly, this could cause the system to malfunction.
The PTCR-20 is compatible with all Windows 9x software, and Windows XP. It is NOT
compatible with Windows NT or Windows 2000. When using the PTCR-20 test software, the
GVS1000 can be operated directly from a bi-directional link compatible with RS422.
6.1

PTCR-20 Software Operation

Install the PTCR-20 Remote Emulator using the supplied CD.
Connect the GVS1000 to the PC using an RS232 straight cable. Unplug the green terminal
blocks from the code translator in the PSU. If the green terminal blocks are not removed from
the code translator when RS232 cable is attached, the software control may not function
properly.
Figure 6.1
1
2
F.01U.173.867 | 2.0 | 2010.11
Green Terminal Blocks
RS232 Straight Cable to PC
Operations Manual
Global View Station 1000
Bosch Security Systems, Inc.