Inverting Tilt Controls; Other Menus - Bosch GVS1000 Operation Manual

Global view station 1000

Hide thumbs Also See for GVS1000:

Table of Contents

en | Test Software

6.1.3

Inverting Tilt Controls

To invert the tilt settings, change the tilt settings:

–

Once the Tilt controls are reversed, the up and down soft limits are also reversed.

For example, click the "U" direction on the track pad until the camera has reached the desired

Down soft limit position. Then, click the Set Up Soft Limit to set the Down Soft Limit. The

motor's downward direction Soft Limit has now been set. Repeat for the Up Soft Limit.

The same goes for setting the soft limits on the keyboard. Position the camera unit to the

desired up view by pushing down on the joystick. Programming preset 38 will set Up Soft

Limit and programming preset 37 will set Down Soft Limit. The soft limit is independent of the

path taken to reach it, and only the position is saved for the appropriate limit.

6.1.4

The MOVE TO menu allows the user to input a coordinate for the GVS1000 to move to, the

PRESETS menu allows the user to manage the preset positions, the TOURS menu allows the

user to use to compose a tour from preset positions, and the OFFSETS menu allows the user

to set or reset the coordinate system for the GVS1000.

F.01U.173.867 | 2.0 | 2010.11

Uncheck Tilt Mtr Reverse

Uncheck Tilt Res Invert

Click Set Normal/Reverse

Click Get Normal/Reverse to ensure the setting was applied

Figure 6.10 Settings to Invert Tilt Control

Operations Manual

Global View Station 1000

Bosch Security Systems, Inc.

Table of Contents

Global view station 1000