Bosch GVS1000 Operation Manual page 25

Global View Station 1000
Using the PTCR-20 Software
1.
2.
3.
Bosch Security Systems, Inc.
Run PTCR-20. The PC shows the display below.
Figure 6.2 PTCR-20 Main Screen
Verify COM port and Baud rate (9600 bps), and then click START. The COM port varies
from computer to computer.
Figure 6.3 Verify COM Port and Baud Rate
The Handshake icon below indicates a communication link between the Pan/Tilt motor
and the PC has been established.
Figure 6.4 PTCR-20 Main Screen with Handshake
After testing and setup, exit PTCR-20, disconnect the RS232 cable, and reconnect the
green terminal blocks in the PSU. Contact a Bosch service centre for further instructions
as needed.
Operations Manual
Test Software | en 25
F.01U.173.867 | 2.0 | 2010.11